Linux LVM学习总结——创建卷组VG

在Linux平台如何创建一个卷组（VG）呢？下面简单介绍一下卷组（VG）的创建步骤。本文实验平台为Red Hat Enterprise Linux Server release 6.6 (Santiago)

1：查看当前卷组信息

查看服务器的卷组（VG）、物理卷（PV）、逻辑卷（LV）相关信息，在此之前，我们先来看看一些基本命令以及用法

vgcan命令介绍 :

查找系统中存在的LVM卷组，并显示找到的卷组列表。vgscan命令仅显示找到的卷组的名称和LVM元数据类型，要得到卷组的详细信息需要使用vgdisplay命令。

vgscan的参数：

[—cache]	Scan devices for LVM physical volumes and volume groups and instruct the lvmetad daemon to update its cached state accordingly
[–commandprofile ProfileName]
[-d\|–debug]	调试模式
[-h\|–help]	查看帮助信息
[–ignorelockingfailure]	忽略锁定失败的错误。
[–mknodes]	Also checks the LVM special files in /dev that are needed for active logical volumes and creates any missing ones and removes unused ones
[-P\|–partial]	部分模式。将处理不完整的逻辑卷
[-v\|–verbose]	显示输出详细信息
[–version]	查看命名版本信息

pvscan命令介绍：

扫描系统中连接的所有硬盘，列出找到的物理卷列表。

pvscan的参数:

pvscan

[-b\|—background]	在后台运行这个命令
[–cache [-a\|–activate ay] [ DevicePath \| –major major –minor minor]…]
[–commandprofile ProfileName]
[-d\|—debug]	调试模式
{-e\|–exported \| -n\|—novolumegroup}	-e 仅显示属于输出卷组的物理卷; -n 仅显示不属于任何卷组的物理卷;
[-h\|-?\|–help]	显示命令的帮助信息
[—ignorelockingfailure]	忽略锁定失败的错误。
[-P\|—partial]	部分模式. 将处理不完整的逻辑卷
[–readonly]
[-s\|—short]	简短格式输出
[-u\|—uuid]	显示输出UUID信息
[-v\|—verbose]	显示输出详细信息
[—version]	查看pvscan命令版本

lvscan命令介绍：

扫描当前系统中存在的所有LVM的逻辑卷（lv)

lvscan的参数：

[-a\|—all]	输出所有的逻辑卷信息
[-b\|–blockdevice]	显示逻辑卷的主设备号和次设备号
[–cache]
[–commandprofile ProfileName]
[-d\|—debug]	调试模式
[-h\|-?\|–help]	查看命令的帮助信息
[——ignorelockingfailure]	忽略锁定失败的错误。
[-P\|—partial]	部分模式. 将处理不完整的逻辑卷
[–readonly]
[-v\|—verbose]	输出详细的结果
[—version]	查看lvscan命令版本

[root@getlnx20 ~]# vgscan

  Reading all physical volumes.  This may take a while...

  Found volume group "VolGroup00" using metadata type lvm2

[root@getlnx20 ~]# pvscan

  PV /dev/sda2   VG VolGroup00   lvm2 [39.51 GiB / 0    free]

  Total: 1 [39.51 GiB] / in use: 1 [39.51 GiB] / in no VG: 0 [0   ]

[root@getlnx20 ~]# lvscan

  ACTIVE            '/dev/VolGroup00/lv_root' [31.51 GiB] inherit

  ACTIVE            '/dev/VolGroup00/lv_swap' [8.00 GiB] inherit

[root@getlnx20 ~]# df -h

Filesystem            Size  Used Avail Use% Mounted on

/dev/mapper/VolGroup00-lv_root

                       31G  2.5G   27G   9% /

tmpfs                 3.9G     0  3.9G   0% /dev/shm

/dev/sda1             477M   33M  419M   8% /boot

[root@getlnx20 ~]#

新增一块硬盘后，使用fdisk -l命令，我们可以看到这块新增的硬盘被标记为/dev/sdb

[root@getlnx20 ~]# fdisk -l

Disk /dev/sda: 42.9 GB, 42949672960 bytes

64 heads, 32 sectors/track, 40960 cylinders

Units = cylinders of 2048 * 512 = 1048576 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x0006822c

   Device Boot      Start         End      Blocks   Id  System

/dev/sda1   *           2         501      512000   83  Linux

Partition 1 does not end on cylinder boundary.

/dev/sda2             502       40960    41430016   8e  Linux LVM

Partition 2 does not end on cylinder boundary.

Disk /dev/mapper/VolGroup00-lv_root: 33.8 GB, 33831256064 bytes

255 heads, 63 sectors/track, 4113 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

Disk /dev/mapper/VolGroup00-lv_swap: 8589 MB, 8589934592 bytes

255 heads, 63 sectors/track, 1044 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

Disk /dev/sdb: 85.9 GB, 85899345920 bytes

255 heads, 63 sectors/track, 10443 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

新增一个80G的硬盘，但是为什么使用fdisk -l命令查看到的是85.9G？相信很多人看到这个都会有些疑惑。这个是因为计算时使用的单位有所差异所致， 85899345920/1024/1024/1024=80G，而85899345920/1000/1000/1000 ~= 85.899 ~= 85.9G 。

2：新建一个分区（partition）

新建一个主分区（primary partition）或逻辑分区（logical partition）都OK

[root@getlnx20 ~]# fdisk /dev/sdb

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel with disk identifier 0xaa12f277.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to

         switch off the mode (command 'c') and change display units to

         sectors (command 'u').

Command (m for help): n

Command action

   e   extended

   p   primary partition (1-4)

Partition number (1-4): 1

First cylinder (1-10443, default 1): 1

Last cylinder, +cylinders or +size{K,M,G} (1-10443, default 10443):

Using default value 10443

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

3：创建PV（物理卷）

[root@getlnx20 ~]# pvcreate /dev/sdb1

  Physical volume "/dev/sdb1" successfully created

[root@getlnx20 ~]# pvscan

  PV /dev/sda2   VG VolGroup00   lvm2 [39.51 GiB / 0    free]

  PV /dev/sdb1                   lvm2 [80.00 GiB]

  Total: 2 [119.51 GiB] / in use: 1 [39.51 GiB] / in no VG: 1 [80.00 GiB]

4：创建VG（卷组）

[root@getlnx20 ~]# vgcreate -s 32M VolGroup01 /dev/sdb1

  Volume group "VolGroup01" successfully created

[root@getlnx20 ~]# vgscan

  Reading all physical volumes.  This may take a while...

  Found volume group "VolGroup01" using metadata type lvm2

  Found volume group "VolGroup00" using metadata type lvm2

5：查看VG可用空间

[root@getlnx20 ~]# vgdisplay

  --- Volume group ---

  VG Name               VolGroup01

  System ID

  Format                lvm2

  Metadata Areas        1

  Metadata Sequence No  1

  VG Access             read/write

  VG Status             resizable

  MAX LV                0

  Cur LV                0

  Open LV               0

  Max PV                0

  Cur PV                1

  Act PV                1

  VG Size               79.97 GiB

  PE Size               32.00 MiB

  Total PE              2559

  Alloc PE / Size       0 / 0

  Free  PE / Size       2559 / 79.97 GiB

  VG UUID               FD5kEp-a9Cv-K181-Xb7e-i8k4-zV52-Dbuxc3

  --- Volume group ---

  VG Name               VolGroup00

  System ID

  Format                lvm2

  Metadata Areas        1

  Metadata Sequence No  3

  VG Access             read/write

  VG Status             resizable

  MAX LV                0

  Cur LV                2

  Open LV               2

  Max PV                0

  Cur PV                1

  Act PV                1

  VG Size               39.51 GiB

  PE Size               4.00 MiB

  Total PE              10114

  Alloc PE / Size       10114 / 39.51 GiB

  Free  PE / Size       0 / 0

  VG UUID               sWwXef-0AHf-66ZI-dZHh-JuJt-KMj7-YqIisW

[root@getlnx20 ~]#

6：建立逻辑卷（LV）

[root@getlnx20 ~]# lvcreate -L79.97G -n LogVol00 VolGroup01

  Rounding up size to full physical extent 80.00 GiB

  Volume group "VolGroup01" has insufficient free space (2559 extents): 2560 required.

[root@getlnx20 ~]# lvcreate -L79.96G -n LogVol00 VolGroup01

  Rounding up size to full physical extent 79.97 GiB

  Logical volume "LogVol00" created

[root@getlnx20 ~]# lvscan

  ACTIVE            '/dev/VolGroup01/LogVol00' [79.97 GiB] inherit

  ACTIVE            '/dev/VolGroup00/lv_root' [31.51 GiB] inherit

  ACTIVE            '/dev/VolGroup00/lv_swap' [8.00 GiB] inherit

7：建立文件系统

[root@getlnx20 ~]# mkfs -t ext3 /dev/VolGroup01/LogVol00

mke2fs 1.41.12 (17-May-2010)

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

5242880 inodes, 20963328 blocks

1048166 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=4294967296

640 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks:

        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,

        4096000, 7962624, 11239424, 20480000

Writing inode tables: done

Creating journal (32768 blocks): done

Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 24 mounts or

180 days, whichever comes first.  Use tune2fs -c or -i to override.

8：建立挂载点

[root@getlnx20 ~]# mkdir /mysqldata

9：挂载存储

[root@getlnx20 ~]# mount /dev/VolGroup01/LogVol00 /mysqldata

[root@getlnx20 ~]# df -h

Filesystem            Size  Used Avail Use% Mounted on

/dev/mapper/VolGroup00-lv_root

                       31G  2.5G   27G   9% /

tmpfs                 3.9G     0  3.9G   0% /dev/shm

/dev/sda1             477M   33M  419M   8% /boot

/dev/mapper/VolGroup01-LogVol00

                       79G  184M   75G   1% /mysqldata

[root@getlnx20 ~]#

10：修改fstab配置文件实现自动挂载

[root@getlnx20 ~]# more /etc/fstab

# /etc/fstab

# Created by anaconda on Sat Jun 13 10:29:07 2015

# Accessible filesystems, by reference, are maintained under '/dev/disk'

# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info

/dev/mapper/VolGroup00-lv_root /                       ext4    defaults        1 1

UUID=5486634e-ec6a-42d5-bbb9-dcd92537c294 /boot                   ext4    defaults        1 2

/dev/mapper/VolGroup00-lv_swap swap                    swap    defaults        0 0

/dev/VolGroup01/LogVol00                                /mysqldata  ext3 defaults 1 1

tmpfs                   /dev/shm                tmpfs   defaults        0 0

devpts                  /dev/pts                devpts  gid=5,mode=620  0 0

sysfs                   /sys                    sysfs   defaults        0 0

proc                    /proc                   proc    defaults        0 0

[root@getlnx20 ~]#

By CloudITIDC Global on 13 12月 2017 0 Categories / 帮助文档

Linux LVM学习总结——创建卷组V...

Linux LVM学习总结——创建卷组VG

Linux LVM学习总结——创建卷组VG